Road Cycling - will a 28" tubular fit a 700 rim?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : will a 28" tubular fit a 700 rim?


sharkGu
03-11-09, 10:22 AM
Like a moron I accidentally ordered some 28" tubulars from PBK not noticing they weren't 700s. Will they fit? After about 10mins of trying I'm inclined to say no... The strange thing is that 28" is longer than 700mm, so they must be measuring different things.

Who uses 28" wheels? Anyone need some cheap Continental Giro tubulars?


lotek
03-11-09, 10:25 AM
its just the way that Continental labels their tubulars.
I have Giro's, Sprinters and Competitions on 700c rims (and tires all labeled 28")

Make sure you really stretch the Giro's before mounting them, it just takes a bit
of patience.

marty

Frunkin
03-11-09, 10:26 AM
Those are the right size. Try harder to stretch them on, because conti's run really small.


DiabloScott
03-11-09, 10:32 AM
And just for the record - standard tubulars will fit on a 700c clincher rim too. Good way to stretch out and pressure test new tubies before gluing them on the sew up rims.

sharkGu
03-11-09, 10:52 AM
Thanks, you made my day!!! :thumb:

Now I've got to ask...what's the best way to stretch tubulars before you put them on the rim?

ElJamoquio
03-11-09, 10:54 AM
Is there more than one way to stretch tubulars?

halfspeed
03-11-09, 12:16 PM
Bicycle tire size naming conventions are a mess. As an example, 700C, 28" and 29" tires all fit on the same diameter rim which is smaller than a rim for 27" tires. If you want a measurement useful for comparison, use the ISO standards. http://www.sheldonbrown.com/tire_sizing.html.

Road Fan
03-11-09, 01:55 PM
Is there more than one way to stretch tubulars?

YOU can't be serious asking that question!

But just because you did, yes. Put it on a tubular rim, put it on a clincher (700C) rim, stand on the bottom and pull up, wrap it in your arms and use your arms, hook it on the wall and hang a 100# weight ...

But not all tubulars need to be stretched, and I think anything other than the tubular rim method can run the risk of damage due to excess tension.

Road Fan

stripes
03-11-09, 06:03 PM
for contis, i just put them on the rim with no glue for a few days. Easy to mount after that, and you don't have to worry about tearing the base tape.

Homebrew01
03-11-09, 08:49 PM
for contis, i just put them on the rim, pump them up, with no glue for a few days. Easy to mount after that, and you don't have to worry about tearing the base tape.

fixed