cohophysh
03-20-09, 01:19 PM
Hi
I have an ultegra hub that currently has a 9speed, can I put a 10 speed cassette on this hub?
I have an ultegra hub that currently has a 9speed, can I put a 10 speed cassette on this hub?
Bicycle Mechanics - ultegra hub compatibility
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : ultegra hub compatibility
Sturmcrow
03-20-09, 01:26 PM
Yep. It may need a spacer.
cohophysh
03-20-09, 01:41 PM
yay, thanks
Cynikal
03-20-09, 02:06 PM
You shouldn't need a spacer. At least I didn't when I moved from a Ultegra 9 to a DA 10 last week. On an Ultegra hub BTW.
HillRider
03-20-09, 08:24 PM
You shouldn't need a spacer. At least I didn't when I moved from a Ultegra 9 to a DA 10 last week. On an Ultegra hub BTW.
There is a 1mm thick spacer that comes with all Shimano 10-speed cassettes and is used when they are installed on an 8/9/10-speed hub. The spacer goes onto the hub first before the cassette is mounted.
I expect the spacer was stuck to the back of your new DA cassette and you installed it automatically when you installed the cassette.
There is a 1mm thick spacer that comes with all Shimano 10-speed cassettes and is used when they are installed on an 8/9/10-speed hub. The spacer goes onto the hub first before the cassette is mounted.
I expect the spacer was stuck to the back of your new DA cassette and you installed it automatically when you installed the cassette.
Cynikal
03-20-09, 11:39 PM
You are probably right. I bought the cassette from a friend so it was most likely on there.