usherenko
03-23-09, 04:34 PM
52 cm specialized steel sirrus frameset, lugs not tig welds, circa 1990, threadless time carbon stilletto 1" fork, cane creak headset, ritchey wcs seat post and shimano front derailleur, itm stem and original bars 42's, takes 700cc wheel horizontal dropouts.
condition is good, no dings, also will include the original specialized fork. the other parts seen in the photo are not part of the sale, auction is just for the frame, fork, headset, cage, front derailleur, seatpost and sti shifhter stops on the downtube. I'll try to include a shimano square taper bb if the buyer requests it. If the winner of this auction is in the united states i will offer for $40 a wheelset, the front wheel is the original wheel to this bike, its a wobler rim on a 105 hub, the rear is a top of the line mavic sup ceramic rim on a tnt titanium hub, however the hub is cracked, the spokes and rim are in near perfect condition but the hub must be replaced before its ridden, so if you were to buy these wheels it would cost you about $20 to come up with an 105 hub and then another $20 to have it build.
SO no cranks, no bb, no saddle included.
http://i606.photobucket.com/albums/tt143/usherenko/BOeqW8w2kKGrHgoH-C4EjlLl0-E2BJu91jW.jpg
http://i606.photobucket.com/albums/tt143/usherenko/BOvbVTBWkKGrHgoH-DkEjlLl0KttBJwOp5r.jpg
thanks.....alex
condition is good, no dings, also will include the original specialized fork. the other parts seen in the photo are not part of the sale, auction is just for the frame, fork, headset, cage, front derailleur, seatpost and sti shifhter stops on the downtube. I'll try to include a shimano square taper bb if the buyer requests it. If the winner of this auction is in the united states i will offer for $40 a wheelset, the front wheel is the original wheel to this bike, its a wobler rim on a 105 hub, the rear is a top of the line mavic sup ceramic rim on a tnt titanium hub, however the hub is cracked, the spokes and rim are in near perfect condition but the hub must be replaced before its ridden, so if you were to buy these wheels it would cost you about $20 to come up with an 105 hub and then another $20 to have it build.
SO no cranks, no bb, no saddle included.
http://i606.photobucket.com/albums/tt143/usherenko/BOeqW8w2kKGrHgoH-C4EjlLl0-E2BJu91jW.jpg
http://i606.photobucket.com/albums/tt143/usherenko/BOvbVTBWkKGrHgoH-DkEjlLl0KttBJwOp5r.jpg
thanks.....alex
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.