Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.kawasakiguy37
04-01-09, 07:50 PM
I get a lot of toe overlap now that I have adjusted my cleats back on my shimano m075's and put on a new fork. I had a redline brand fork before (aluminum, had a bend like a traditional fork) and recently replaced with it an EC90X (straight fork). I have not measured the rake on either, and they could be the same, but I definitely got no toe overalp with the old fork and old cleat setup. Do many forks different in rake much? Is there another fork I could replace my current one with that could help alleviate this problem? Material is not an issue for me, Im fine with steel, aluminum, carbon, etc, as long as it isnt too pricey (and if its steel, I want a decently light steel fork).