Bicycle Mechanics - fork/headset question

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : fork/headset question

brunning
05-24-04, 07:29 PM
i have a 1" threaded fork on my bike.

i can replace the headset with a 1" threadless headset and use a threadless fork, correct?

thanks!

Fat Hack
05-24-04, 09:11 PM
Well, none of the 'experts' have answered you, so I'm gunna say "yes" :)

I'm planning on doing the same thing; I'm 97% sure this is possible.
gt_me
05-24-04, 09:16 PM
Yes you can get a 1" threadless headset and a 1" threadless fork along with a 1" threadless stem and you are set. Just remember when you are cutting the steer tube on the fork to measure twice and cut once! Good luck, if you have any more questions let me know.

khuon
05-24-04, 09:20 PM
Just remember when you are cutting the steer tube on the fork to measure twice and cut once!

I would also advise that you don't cut it down as much initially but instead, play some spacer games and ride with the stem at various heights for a while to determine what eventual height you'll want.
OneTinSloth
05-24-04, 09:23 PM
i second what khuon has said. and i would measure three times, and cut once.
Fat Hack
05-24-04, 09:23 PM
How much is too much steerer, if it's carbon?
RobotSonic
05-24-04, 11:21 PM
How much is too much steerer, if it's carbon?

i believe you can stack as high as it is wide...so 1"