Electronics, Lighting, & Gadgets - polar cs200: anyone having problem with speed display cutting out?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
salv2112
04-18-09, 09:03 PM
Used my cs200 for the first time on the road today. It displayed speed for most of the ride, but intermittently displayed "0.0" (and I was moving, not fast, but I was moving). Polar instructions suggest electromagnetic interference but I didn't see anything that would cause that. Any insights/suggestions?
operator
04-18-09, 10:26 PM
Used my cs200 for the first time on the road today. It displayed speed for most of the ride, but intermittently displayed "0.0" (and I was moving, not fast, but I was moving). Polar instructions suggest electromagnetic interference but I didn't see anything that would cause that. Any insights/suggestions?
Is the magnet close enough to the sensor?
salv2112
04-19-09, 10:00 AM
Operator- thanks, I looked and adjusted it, maybe it will help. While doing that, I noticed that the magnet from a prior computer was nearby, so I removed it. Maybe the sensor was picking up two signals? Thanks for your help. salv2112