Framebuilders - Frame bits

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Frame bits


75PIN
06-07-09, 02:04 PM
Hi Guys

I`ve just popped over from the folding bike section of this forum to ask a quick question,

I`m in need of a couple of frame parts 1. Rear brake bridge for offcentre pivot brakes
2. Braze on front mech mount,

Can anybody point me in the right direction or supply me with these parts? (new or second hand)


Many thanks
Adrian


unterhausen
06-08-09, 11:23 AM
I assume you mean steel. You don't give a location. Is a front mech the same as a front derailleur? Ceeway in the UK and Nova cycles in the U.S. The brake bridge will probably have to be fabricated, although one of the pre-made ones might be modified to what you want.

75PIN
06-08-09, 12:19 PM
Hi
Thanks for the reply
I`m based in the Uk and have thought of Ceeway but assumed
there would be a charge for such a small order,

I might give them a ring and find out

Thanks
Adrian