Singlespeed & Fixed Gear - Threaded Steerer Tube Length Question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-13-09, 12:11 PM
I just bought a new Soma Rush frame (only). It's a 53cm frame (110mm headtube). The headset I am putting in has a 38mm stack height. That gives me a 148mm steerer tube length need. Soma's fork comes in a 140mm steerer tube length or 170mm. Is cutting down a 170mm a good option? Or should I try and space it out the 22 extra mm (0.866 inches)?
06-13-09, 01:06 PM
Just get the longer one and cut it down.
06-13-09, 07:20 PM
Hello I agree I would get the longer one and cut it, but if it was mine or a good customers frame I might stack/space the headset about 8-10 cm. I do this 1 beacause at some point a taller headset might get used. 2 since you are using a quill stem it gives you an extra 8-10 cm of height. but this is just my humble opinion
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.