Mountain Biking - Preventing thorn flats?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Village Idiot
06-22-09, 07:36 AM
Is there something I can use to help prevent flats from thorns? I've had three in less than a week and it sucks.
Face-Plant
06-22-09, 07:59 AM
Maybe something like SpinSkins (http://www.spinskins.com/)
or
Slime Single Liner (http://www.performancebike.com/bikes/Product_10052_10551_1035352_-1___20004)
kenhill3
06-22-09, 08:01 AM
+1 on the Kevlar Spinskins. I've used 'em and was happy with 'em.
Village Idiot
06-22-09, 08:05 AM
Sorry. Forgot to add that it's a 29'er
-_RebelRidin'_-
06-22-09, 08:41 AM
The Slime tire liners work.
I used those, with a combination of those superthick "armored" tubes with the slime tube sealant inside them for a while. Never had any flats, just the tires were a lot heavier...
I ditched the real heavy stuff when I started racing.
Village Idiot
06-22-09, 09:04 AM
So could I possibly buy three of these for two 29" wheels? Use one strip as a cut and patch piece to fill the gap of putting a 26" liner in a 29" wheel?
thompsonpost
06-22-09, 09:19 AM
For years I've been using previous flatted tubes to line my tires. Slice a tube all the way around the inside like it were a fish being gutted. Snip the stem off. Stick it in the tire. Take another tube that will be inflated and line the inside of the sliced tube with the good tube. Make sure it's partially inflated so it holds the sliced tube in place as you install the good tube. Seat the tire, inflate to desired pressure. I've put up to three of these in my tires at different times. Once in a while, inspect te tire for intrusions that may penetrate but don't puncture. 1 tube=$3. Very cheap protection.
An advantage is that the first liner will usually stick to the inside of the tire after it's been in there awhile. Seldom do I flat, and even less do I patch.
TheFountain
06-22-09, 09:49 AM
I agree with the above comments. The spin skins are a great investment.
Village Idiot
06-22-09, 10:11 AM
I agree with the above comments. The spin skins are a great investment.
But I have a 29'er.
TheFountain
06-22-09, 10:27 AM
But I have a 29'er.
Wow, I've been browsing the internet and haven't found squat for a 29'er. The only thing I could recommend would be a self sealing smart tube??? I have these on my road bike because my tires are JUNK and they've been holding out.
Just a thought.
I'll keep looking for stuff and I'll check around at our LBS to see if they can recommend anything.
Village Idiot
06-22-09, 11:11 AM
Wow, I've been browsing the internet and haven't found squat for a 29'er. The only thing I could recommend would be a self sealing smart tube??? I have these on my road bike because my tires are JUNK and they've been holding out.
Just a thought.
I'll keep looking for stuff and I'll check around at our LBS to see if they can recommend anything.
Thanks. As of now it's looking like the tube inside a tube deal would be the best idea. That or buying the anti puncture tape and getting a third set to use to patch the portion that's going to have no coverage.
Satan's Boogers
That's against my religion.
thompsonpost
06-22-09, 11:25 AM
Thanks. As of now it's looking like the tube inside a tube deal would be the best idea. That or buying the anti puncture tape and getting a third set to use to patch the portion that's going to have no coverage.
That's against my religion.
Like I said, 'been doing it since I was a kid, that's at least 40 years. In the past 10 years, I've had probably 3-4 flats (really) and I've done a lot of off road. Used to ride above Goldbar, WA. Every weekend. 200 miles a week, to and from work and 140 mile weekends.
I still do it. Cheapest, best way to go.
thompsonpost
06-22-09, 11:26 AM
Use thick tubes.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.