harsymran
06-21-04, 01:33 PM
i twisted my changer`s screws of my trek 2300
can nething be done except changing the frame
:(
can nething be done except changing the frame
:(
General Cycling Discussion - help me !!
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : help me !!
demoncyclist
06-21-04, 01:53 PM
I'm guessing that you mean that you have a bent derailleur hanger. Is this correct? If so, I believe that it is replaceable, since aluminum can't be straightened.
RonH
06-22-04, 07:28 AM
What screws are you talking about?
madpogue
06-22-04, 09:22 AM
And what do you mean by "twisted"?
harsymran
06-22-04, 12:04 PM
hey how can a hanger b replaced in my bike its a part of the frame i guess
screws as in in which u screw
and twisted means bent
screws as in in which u screw
and twisted means bent
Trek Rider
06-22-04, 12:07 PM
How old is the frame? Newer Treks have a hanger that bolts to the frame. If your's is older and not replaceable, you can always have your LBS install a Heli-Coil or other thread repair kit.
MERTON
06-22-04, 12:11 PM
pics.
bg4533
06-22-04, 12:16 PM
pics.
That would probably be the best idea since you aren't very clear on what you did. The changer you mentioned could be the front derailer, rear derailer, shifters or probably other things. The frame itself really shouldnt have any screws you can bend.
I am going to guess you bent your rear derailer. This can easily be replaced. My suggestion though is to take it into a bike shop and have them look at it. If you can get us some pics or figure out the correct terminology to describe what is wrong we might be able to help a bit.
That would probably be the best idea since you aren't very clear on what you did. The changer you mentioned could be the front derailer, rear derailer, shifters or probably other things. The frame itself really shouldnt have any screws you can bend.
I am going to guess you bent your rear derailer. This can easily be replaced. My suggestion though is to take it into a bike shop and have them look at it. If you can get us some pics or figure out the correct terminology to describe what is wrong we might be able to help a bit.
harsymran
06-27-04, 02:18 PM
that is my rear derailer
thankx trek rider n all
thankx trek rider n all
Turbonium
06-27-04, 11:41 PM
hey hars
ill take some pictures of your trek when i get back to chandigarh. that means we can't go riding!?
ill take some pictures of your trek when i get back to chandigarh. that means we can't go riding!?
harsymran
07-02-04, 02:13 PM
ya sure thing
jus give me a call dude!!
jus give me a call dude!!