Electronics, Lighting, & Gadgets - Cateye Cadence Cyclometer not showing speed/mileage anymore
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
calbrner
07-01-09, 06:23 PM
It started yesterday and it isn't working any more.
I adjusted the magnet and it still doesn't work. What else could it be? The cadence is still working...
seeker333
07-01-09, 07:30 PM
check/change transmitter unit battery
Look for damage to wire, if not wireless. Try removing and reinstalling computer into mount if it is wired as well.
Not the Slowest
07-02-09, 09:22 AM
You may have dirt under the monitor unit, easy fix. I get this 3-4 times a year
from rain etc.
Remove unit from handlebar mount. The monitor slides out and may be by a plastic clip, bend down, you'll see it.
CLEAN the connections on the back of the monitor, it may be 2 little metal dots.
Clean off connections on mounting unit that is on the handlebar.
A bit of alcholol on a paper towel or just water.
Re-Mount, Spin wheel and see if it the screen indicates speed.
if it does, you're done. If not try again.
Robert
Wanderer
07-02-09, 09:32 AM
+1 What he said!
calbrner
07-08-09, 02:50 AM
I did all the stuff and finally decided to check the manual. I lined up the sensor on the wrong area. Thanks for all the help!
Not the Slowest
07-10-09, 10:25 AM
lol, it usually is the obvious.
Happy Trails