Classic & Vintage - 144 BCD Chainrings

Just wondering who still makes road chainrings in BCD 144?

Something that would work with an old Campagnolo crankset. Sugino used to make Campy-copy rings, right?

ebay... okay kidding..

you can buy track rings new in this size for sure from sugino for one...

Perhaps TA specialties also as they make a wide variety of sizes.

Yes, I might scrounge ebay for nice NR chainrings. TA...I will check that out! Thanks!

TA's are nice as they offer a 41T inner ring.

My only complaint is they are "SR" style with no webbing so a bit flexi.

I have some larger Campagnolo I don't need, 53, 54 I think...

These are American made replicas of the old Campy Nuovo Record chainrings. I've also found 144 BCD road (3/32") NOS parts made by Sugino, SR (Sakae Royal) and even Stronglight that will fit, although only the Sugino will match the Campy for appearance.

http://cgi.ebay.com/52-TOOTH-ROAD-BIKE-CHAINRING-144-BCD-CAMPAGNOLO-CAMPY_W0QQitemZ200301174730QQcmdZViewItemQQptZCycling_Parts_Accessories?hash=item2ea2e15fca&_trksid=p4634.c0.m14.l1262&_trkparms=%7C293%3A1%7C294%3A30

http://cgi.ebay.com/42-TOOTH-ROAD-BIKE-CHAINRING-144-BCD-CAMPAGNOLO-CAMPY_W0QQitemZ370091900015QQcmdZViewItemQQptZCycling_Parts_Accessories?hash=item562b323c6f&_trksid=p4634.c0.m14&_trkparms=%7C293%3A1%7C294%3A30

I have a 144mm stash -- what tooth counts do you need?

thanks for the link tejano trackie and john e I will send you a PM.

or have a new one made at Cycle Underground (http://www.cycleunderground.com.au/chainringdesigns.htm)
Mine arrived during the week

or have a new one made at Cycle Underground (http://www.cycleunderground.com.au/chainringdesigns.htm)
Mine arrived during the week

Description says that these have teeth that are not intended for gear changing. Great if you're doing SS/FG; otherwise, not so much.

Description says that these have teeth that are not intended for gear changing. Great if you're doing SS/FG; otherwise, not so much.
There's Highpath Engineering (http://highpath.net/cycles/orders/egg.html); they can cut their rings for gear changes if you specify that's how you intend to use them.

There's Highpath Engineering (http://highpath.net/cycles/orders/egg.html); they can cut their rings for gear changes if you specify that's how you intend to use them.

Now we've gone from $50 AUS to 72 GBP per ring! Seems to me that buying a whole Sugino crankset on eBay is the way to go.

I actually just scored a NOS Nuovo Record 52-tooth outer ring for $35. Sure, I dont know if they are machined as nice as the new TA rings, but hey you can't beat the look of a NR outer ring. Pure class.