Singlespeed & Fixed Gear - Shimano 105 FC-1055 cranks
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Just wondering if anyones running these setup as fixed. For a standard double chainline (46mm outer ring) they use a 113mm bottom bracket. My question is... Anyone running these with a 107mm bottom bracket and how close is it to 42mm? Cheers.
07-16-09, 02:35 PM
so: if the outer ring is at 46mm with a 113 bottom bracket, you can calculate where it will be with a 107mm bottom bracket. here's how:
subtract 107 from 113 to get the difference. the answer is 6.
divide 6 in half. you get 3. three millimeters. the reason you divide it in half is because you are taking length off from both sides of the spindle.
next, subtract 3 from 46. the answer is 43 millimeters.
next, subtract 42 from 43, and the answer is 1 millimeter.
so: how close is it to 42? 1 millimeter.
Cheers mate thats what I was thinking but its always nice to have some input. Think it might work out for me.
07-16-09, 03:38 PM
I run 105 cranks. With the 113mm spindle. Put the chainring on the inside and all is good.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.