Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.meb
08-14-09, 03:57 AM
I have a Turner AWD system installed on one of my mountain bikes. The front wheel has a single speed Sachs freewheel that may need replacing due grit in the freewheel. I'm speculating this mates to the same Park FR-6 tool as is common on most bmx freewheels, but thought I could give some dimensions to confirm before I order the tool.
The freewheel has a 4 notch removal pattern, the outside diameter of the cross notches is about 40mm, the notches are individually 2mm deep radially and 8 mm wide about the circumferential arc.
Are these the dimensions for a freewheel that mates with the Park FR-6?
If not, any other candidates?
The freewheel has a 4 notch removal pattern, the outside diameter of the cross notches is about 40mm, the notches are individually 2mm deep radially and 8 mm wide about the circumferential arc.
Are these the dimensions for a freewheel that mates with the Park FR-6?
If not, any other candidates?