Bicycle Mechanics - Campy three piece bottom bracket catridge bearing sizes
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-14-09, 12:23 PM
Hello, does anyone know the sizes of cartridge bearings in a 68x111 (or 110.5?) square-taper campy bottom bracket that came off a 1993 Basso Titanium with a record component group? It has one larger cartridge bearing on the non-drive side and two smaller cartridges on the drive size. I took measurements when I had it apart but unfortunately they were crude and I don't trust them...so if someone can verify or point me to a good web resource, I would appreciate it! Apparently my skills with the google are lacking.
08-14-09, 02:11 PM
Google skills have improved and I finally found what I was looking for. Here it is, for future reference:
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.