Bicycle Mechanics - 23.8mm lever on a 24mm bar?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Pretty simple question: Will a 23.8mm brake lever fit on a 24mm drop bar without any problems? I figure it will but I thought I'd gather your knowledge before I make my purchase. BTW, bar is a Nitto B-123 and I'm looking to mount a lever right near the stem. Thanks!
08-14-09, 04:23 PM
08-14-09, 06:17 PM
If you are going to mount the lever right against the stem, the bar diameter at that point will be 25.4 mm. Road bars are nominally 24 mm at the drops, hooks and tops but increase in diameter to 25.4, 26.0, etc. for about 2" to 3" on either side of the handlebar clamp.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.