Alt Bike Culture - Tubing Size Help
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-27-09, 09:29 AM
I'm going to be ordering some tubing for a cargo bike and to make things simple I'd like to limit it to one size. I want to be able to use a size that will accept a 1 /18 headset cup. Does anyone know what the ID of a 1 1/8 headtube is?
08-27-09, 07:23 PM
Park Tool says 33.8 or 33.9mm inside diameter of the headtube, for an interference fit of the bearing cups. This is for both threaded and threadless headsets.
I'm thinking that some work with a caliper will be needed to select the closest tubing size. It may be necessary to ream to final size.
Your construction plan sounds interesting. I'd like very much to hear more of the details.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.