Bicycle Mechanics - lower seat post
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
09-05-09, 06:56 PM
Has anyone shortened a seat post on a Kestrel Talon?
09-05-09, 07:25 PM
I don't see why any seatpost could not be shortened. The only thing you need to remember is to mark the cut post at the same length from the end as the old post with a minimum insertion line. If it's a non-round cross section tube (like my Ritchey WCS posts) or a carbon fiber seatpost of any style, you'll want to use a fine tooth hacksaw blade for cutting it. Read up on cutting steerer tubes for info on how to make sure you get a nice cut if your seatpost is carbon fiber.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.