tkp
09-07-09, 12:54 AM
Hello all,
I am working in Hanoi at the moment and managed to pick up this old bike for about $40. I know next to nothing about bikes but after finding that Gitane was respected company my curiosity was sparked.
I have read up a wee bit on frame sizing this one is 18 1/2" measured center of crank to center of top tube (19 1/2 measured to very top of tube.)
The wheel base is 41 1/2"
I will try to measure angles later...
Although the decals are very faded I can just make out the letters "olympe" on the top tube, but it doesn't look like any of the Olympic medal bikes I have seen discussed on here!!
I got it with shimano deore rear derailleur which i replaced because it was knackered, and deore lx cantilever brakes which i swapped for linear pull because the traffic here is pretty wild...
As you see it has a fair bit of rust, though it doesn't seem very serious.
The wheels are a bit out of true, and maybe worn, and the rear derailleur hanger is a bit bent and has a messy thread.
Basically, I was wondering if it will get me to india... Will i need to treat the rust and re paint it? Will I need to have a welder put some extra attachment points on the frame for bottles and front rack? will i need new wheels? Lots of questions really. I hope you can help.
I am working in Hanoi at the moment and managed to pick up this old bike for about $40. I know next to nothing about bikes but after finding that Gitane was respected company my curiosity was sparked.
I have read up a wee bit on frame sizing this one is 18 1/2" measured center of crank to center of top tube (19 1/2 measured to very top of tube.)
The wheel base is 41 1/2"
I will try to measure angles later...
Although the decals are very faded I can just make out the letters "olympe" on the top tube, but it doesn't look like any of the Olympic medal bikes I have seen discussed on here!!
I got it with shimano deore rear derailleur which i replaced because it was knackered, and deore lx cantilever brakes which i swapped for linear pull because the traffic here is pretty wild...
As you see it has a fair bit of rust, though it doesn't seem very serious.
The wheels are a bit out of true, and maybe worn, and the rear derailleur hanger is a bit bent and has a messy thread.
Basically, I was wondering if it will get me to india... Will i need to treat the rust and re paint it? Will I need to have a welder put some extra attachment points on the frame for bottles and front rack? will i need new wheels? Lots of questions really. I hope you can help.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.