Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I have an Emilano Freschi touring bike that is slowly turning into rust because it has been sitting in a dampish basement for about 10 years. Touring bikes by Emilano Freschi are rather rare. There's no place to store it in the house, esp. now that we have two kids. So, I've decided that is needs a better home than I can give it. I originally purchaced the frame new and built the bike up myself. I've been its only owner. It's been over many thousands of miles while touring the western U.S. and Mexico and never been in a crash. I rode this bike to my own wedding. I really don't want to part with it, but it will just degrade even further if it sits where it is.
Here are some photos (http://www.zaun.com/freschi/). I'm more interested in finding a good home for this bike than getting top dollar, but I also want to be fair to myself. I found a collector that is interested. What would be a reasonable asking price?
I just found this in a bike triva quiz from 1997 by Daniel B. Wood, Ph.D which fits my frame exactly:
After serving for 16 years as chief engineer and builder for Pogliaghi, Emiliano Freschi opened his own custom shop in Milan. His frames, marketed in the US in the early '80s, were sort of an Italian version of the touring bike which produced an interesting blend of racing style and touring practicality. The frames were beautifully-made but didn't sell very well. It didn't fit any one niche firmly enough to succeed from a marketing standpoint. Its fair to say its versatility killed it in the eyes of bike reviewers and the majority of consumers. Frame angles were relaxed, Columbus 510 db tubing was used, and each lug had an handcut triangular window. Campagnolo dropouts were available with double threaded eyelets (the second eyelet was brazed-on just above the dropout), yet the seatstays fastened to the seat lug in a blunted-fastback design reminescent of Cinelli. Every frame included a rear hanger for centerpull brakes, and the brake bridge was reinforced. The three top-tube cable guides were investment cast and brazed on and there were bosses for a single water bottle.
The bb shell was investment-cast, yet the stays were indented for triple crank clearance. The fork crown was a fully-sloping design made of malleable iron.
One truly unique feature of the frame was the cable routing. Every frame came equipped with three extra shift-lever bosses -- one on each side of the down tube, just above the bb and a third on the left of the seat tube also above the bb. The owner could choose to attach machined pulleys (usually aluminum, though I have seen brass ones as well) or individual tunnels that were self-centering. These became the most highly-touted features of this (overly?) versatile frame, with great claims of reduced cable friction and crisper shifting.