Clydesdales/Athenas (200+ lb / 91+ kg) - Aluminum Bike for a Big Guy?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Aluminum Bike for a Big Guy?

Belg-Ital Steel
10-20-09, 01:30 PM
Help before I kill a buddy. I recently came upon an Eddy Merckx aluminum road bike, 90s AluTeam model for really low price and gave the bike to a buddy. He is a former FB player and now weight around 260-270. Is this an accident waiting to happen? Maybe I should get this bike back and give him an old Italian steel frame bike before we both regret the gift?
thx

CranesInTexas
10-20-09, 01:45 PM
6'2" - 270lbs
2004 Trek 1200 (carbon fork)
All stock wheels.

Just a wheel true here and there. otherwise i love it.
fmileto55
10-20-09, 01:46 PM
I just buried my 2007 23inch Trek 7.5FX bike (aluminum frame) with a left broken chainstay. I weigh 245lbs. Fortunately, I found the cracked chainstay while repairing a flat tire and did not suffer a catastrophic failure while riding. No accidents or abuse. I commuted year round on the bike for 2.5 years with over 10,000 miles on it. I bought a 60cm Surly LHT frame and transfered all the components off the Trek. Steel is real!! My confidence in aluminum is shaken, but I'm not a metalurgist (sp?) or metal worker. Just my experience.

CranesInTexas
10-20-09, 01:49 PM
Ask Beanz about breaking bikes. Off the top of my head he broke a steel, a friend broke an aluminum, and another friend broke a carbon. If the frame is in good condition and well maintained it should last and not be a problem.
LongT
10-20-09, 02:13 PM
6'4" 250 lbs I've riddrn since new a 1989 Cannondale road frame, before the replaceable rear derailleur hanger. No failures as of yet to the frame. Broke 2 rear axles and a crank axle, fell over with thaqt one on a hill.

Bill
Mr. Beanz
10-20-09, 04:31 PM
Ask Beanz about breaking bikes. Off the top of my head he broke a steel, a friend broke an aluminum, and another friend broke a carbon. If the frame is in good condition and well maintained it should last and not be a problem.


Close, I broke an aluminum at 220-230
Buddy broke a Derosa Steel at 210-220 lbs.
another buddy broke a ti bike at 155 !:eek:

I say ride it but keep an eye on any bike you ride.:thumb:


My 2005 Lemond. I put 13,000 miles in 2.5 years. I knew it was flexy from the start as it had small diameter tubing at the bottom bracket area. I RARELY stood on it knowing that it flexed too much under me. It snapped on a seated climb at the BB area. From the back of the seat tube then down andn around the downtube!:eek: My CAAD3 Cannondale is a 1998 with a bigger BB area and no problems but it had NO flex at all when I stand. SO I now concern myself with small dia tubing at the BB area. But that would be with any material

Sometimes it doesn't pay being a fatpony!:roflmao2:
http://i98.photobucket.com/albums/l267/gulpxtreme/broke.jpg