KentMadness
10-27-09, 10:25 PM
Just looking for some ideal or inspiration on how will i design my trailer/cart because there is so many difference size and what material did you use
" and thank for help me "
" and thank for help me "
Utility Cycling - what " material " did you made of your trailer or kart
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : what " material " did you made of your trailer or kart
HandsomeRyan
10-28-09, 06:18 AM
I've used wood, welded steel, and bolted steel.
Welding was by far the best if you have access to welding equipment.
Welding was by far the best if you have access to welding equipment.
Gareth
10-28-09, 10:13 AM
My preference when building bicycle trailers and assosiated bits for my bicycles, etc. is to use; 10, 12 & 16 mm outside diametre steel hydraulic pipe and 3mm thick mild steel plate for the frame. stiffners, braces and drawbar. the steel hydraulic pipe is easily bent with a suitable hand bender, the 3mm thick mild steel plate is suitably strong enough for the job and is easily cut with either a hand hacksaw, or electric jigsaw and angle grinder, and it is simple to drill with HSS drill bits. These materials can also be brazed using a propane torch and flux coated brass rods.