Recumbent - REVIVE Owners - check your rear cassette

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
guardrail
08-02-04, 08:40 PM
according to the Giant literature on the Revive (the red one with 8spd's) the rear sprockets set is supposed to be

Shimano 11-32T 8-speed

however I've just checked mine to see if an 11/34 could be fit and found my largest sprocket to be 26 teeth.

Since Giant's website contains absolutely no contact info, my dealer will be hearing about this tomorrow.

cjs1948
08-04-04, 08:01 PM
according to the Giant literature on the Revive (the red one with 8spd's) the rear sprockets set is supposed to be

Shimano 11-32T 8-speed

however I've just checked mine to see if an 11/34 could be fit and found my largest sprocket to be 26 teeth.

Since Giant's website contains absolutely no contact info, my dealer will be hearing about this tomorrow.
If you were looking to change to a 34 tooth gear you already know that the gear range sucked. The 11-32 cassette is on 2004 models only. The earlier models came with the 12-26 which is not useful on any kind of hill. I changed our Revives to 11-34 and they are much improved with this ratio. Bottom line--your bike must be a 2003 and, yes, you will probably want to change it. However, you must also change the derailleur if you change the cassette. (I used Shimano Mega-Range cluster and matching derailleur--and lengthened the chain.)

CS
guardrail
08-17-04, 09:01 PM
how many links did you end up with in the chain?

cjs1948
08-19-04, 07:36 AM
I didn't actually count because I changed the chains on both (we have two) bikes to Sram. I bought three chains and it seems that I ended up somewhere around one and one third standard length chains on each bike.

CS
guardrail
08-25-04, 09:32 PM
ok - got an SRAM 11x32 cassette mounted and a C201 MegaRange derailluer, bought SRAM PC58 chain.

Did you change the drop out that the derailuer mounts on - my derailleur is down so far it hits the sidewall of the tire in low gear (big sprocket).

If you have digital pics and can email them to me send to ejhamil@aol.com

Thanks