Eastern Canada - Montreal Powder Coating?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Montreal Powder Coating?

gonzo_ja
11-25-09, 11:01 PM
So I have an aluminium frame that needs a fresh coat of paint. Does anyone know of any (inexpensive) powder coaters in the city? I haven't had much luck finding a large parts painter who'd be willing to take on a single frame for less than 120 with stripping. If anyone's had any luck besides the standard places (http://communities.canada.com/montrealgazette/blogs/ontwowheels/archive/2009/01/23/a-trip-to-the-bike-painter.aspx), let me know. Thanks!

Creeper
12-02-09, 05:25 PM
Just a sugestion but have you tride a few body shops that do custom car work. I know this sounds fare off but I've heard of some shops in ontario doing this so try your luck with them.
Creeper
12-02-09, 10:31 PM
I found one web site its an airbrushing place if you not into custome shops try looking at places like CAA I'll check a few auto forums I'm with for guys from your province to see if they know any decent shops http://www.creations-jeanpronovost.com/en/airbrush/custom-airbrushed-bicycle/custom-airbrushed-bicycle.htm

defrag
12-08-09, 10:31 AM
Indigo Powder Coating

1140 Montee De Liesse
Saint-Laurent, QC H4S 1J4
(514) 956-8028

http://picasaweb.google.ca/defragmenteur/VelosportPrestige#
TL179
12-12-09, 03:27 PM
Local builder Phil Barge gets all of his frames powdercoated. Get in touch with him and he'll probably direct you. If not, he has a relationship with belleville cycle so they may be able to help you out
verycle
03-09-12, 09:46 AM
Indigo Powder Coating

1140 Montee De Liesse
Saint-Laurent, QC H4S 1J4
(514) 956-8028

http://picasaweb.google.ca/defragmenteur/VelosportPrestige#

Hey Defrag, how much did it cost to get that paint job done?
roobydoo
03-15-12, 09:42 AM
As a short run powder coater (based in ON) the stripping is your challenge. Honestly at $120 you've already got a decent price. I would charge $50 flat rate for the Powder coating if it's stripped and ready to go. The stripping I would want to be compensated by the hour plus materials, Actually, I would typically prefer it just go out to s stripping shop and have it done in a submersion tank.
Get a separate quote for stripping, that may help - unless the first guy is not actually outsourcing (which is likely).
gonzo_ja
03-20-12, 10:31 AM
Roobydoo can you send me an email at *
gonzo_ja
03-20-12, 10:33 AM
Indigo runs about 200 per frame.