Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.immersionroom
11-30-09, 07:55 PM
Hi,
I have a question for a frame builder familiar with strength requirements for a fork to run a drum brake.
I'm restoring a vintage ladies step through frame circa 1940s - long frame with 28x1 3/8 wheels. Originally the bike was only set up with a coaster brake - the front fork is not drilled.
The bike is for my girlfriend and while she prominently uses the coaster brake to stop she'd like the extra security of a front brake. I don't want to drill the fork for a calliper brake. I'd rather use a drum brake.
The brake I'm considering is a Sturmey Archer X-FD
The frame is steel, rather heavy but I'm not sure of the tubing - it's a Malvern 2 Star for those familiar with their bikes (Australian Brand). The overall condition is excellent.
I have seen bikes of a similar era which ran a front drum brake and have seen similar style bikes from Pashley, Gazelle and Kronan - though I realise the later are purpose built with the arm support built into the fork.
I guess my question is - were frames back in the day built using heavy steel which can handle the stress of a drum brake or were specially made to use them?
I can imagine the stress could be quite high on a touring or tandem bike down hills but the set up I'm putting together will be for mostly flat, inner city riding where the brake is supplementary to the coaster brake. I just want to make sure it's not going to destroy the fork or worse put my girlfriend in harms way if the fork seizes.
Any advice appreciated.
Thanks
I have a question for a frame builder familiar with strength requirements for a fork to run a drum brake.
I'm restoring a vintage ladies step through frame circa 1940s - long frame with 28x1 3/8 wheels. Originally the bike was only set up with a coaster brake - the front fork is not drilled.
The bike is for my girlfriend and while she prominently uses the coaster brake to stop she'd like the extra security of a front brake. I don't want to drill the fork for a calliper brake. I'd rather use a drum brake.
The brake I'm considering is a Sturmey Archer X-FD
The frame is steel, rather heavy but I'm not sure of the tubing - it's a Malvern 2 Star for those familiar with their bikes (Australian Brand). The overall condition is excellent.
I have seen bikes of a similar era which ran a front drum brake and have seen similar style bikes from Pashley, Gazelle and Kronan - though I realise the later are purpose built with the arm support built into the fork.
I guess my question is - were frames back in the day built using heavy steel which can handle the stress of a drum brake or were specially made to use them?
I can imagine the stress could be quite high on a touring or tandem bike down hills but the set up I'm putting together will be for mostly flat, inner city riding where the brake is supplementary to the coaster brake. I just want to make sure it's not going to destroy the fork or worse put my girlfriend in harms way if the fork seizes.
Any advice appreciated.
Thanks