Singlespeed & Fixed Gear - Miche Advanced + Hatta BB =?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.

PDA

View Full Version : Miche Advanced + Hatta BB =?

Mongoose441

01-04-10, 09:04 PM

I have an NJS frame with a Hatta BB and I was thinking of Getting a Miche adavanced crankset will these bolt right up or do I need the Miche BB I know they are both ISO square Taper but I thought I may of read (or hallucinated) about the italian campy ISO being different ?

a little help

please

Yo!

01-04-10, 10:19 PM

What frame? Is it an R9400 bb?

Those cranks are ISO, so they'll work with that bb. You're thinking JIS vs ISO, but your setup is right if it's the NJS Hatta.

bigvegan

01-04-10, 10:33 PM

Just make sure the spindle length is correct.

Having cranks that use two different length BBs will make getting a straight chainline tricky.

Yo!

01-04-10, 10:41 PM

Miche pista is 108mm

Hatta is 109mm

Soil_Sampler

01-04-10, 10:47 PM

Miche pista is 108

close, 107 for 42mm chainline.

http://www.miche.it/en/catalogo/catalogo-miche/movimenti/movimento-centrale-primato-2

das_pyrate

01-05-10, 08:44 AM

it should work