Singlespeed & Fixed Gear - TT/reverse brake lever for nitto rb021
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
i was wondering if anybody knows of or is currently using tt/reverse levers on there rb021. i have been searching around and i can only find levers that fit 19-21mm. seeing that the rb's are 26mm im not sure if these will be too small for the bar ends. any help is appreciated.
adriano
01-07-10, 03:14 AM
take out a ruler.
The 26mm measurement is external, at the clamp, not the end where levers go inside.
take out a ruler.
Quoted For Truth.
WoundedKnee
01-07-10, 02:26 PM
I really need one of those caliper gauge things.
A penny is 19mm, use that and eyeball it.
WoundedKnee
01-07-10, 02:46 PM
Eyeballing millimeters is a no-no
Eyeballing millimeters is a no-no
On a brake lever that has a range of expansion from 19-21mm, it should be a no-brainer.
On a brake lever that has a range of expansion from 19-21mm, it should be a no-brainer.
No one else is understanding that. Unless he wants to cut his bar in half at the stem clamp surface, and try to install the lever there.
sharpsandflatts
01-09-10, 10:14 AM
No one else is understanding that. Unless he wants to cut his bar in half at the stem clamp surface, and try to install the lever there.
maybe he's that serious about being able to squeeze through traffic
profile TT brakes will work.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.