Bicycle Mechanics - BB for Ofmega Linea / Regina 1992 crankset

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
Bianchigirll
01-15-10, 01:53 PM
Hello Everyone. I got a fabulous drivetrain set up recently there is just one issue. while I was told the BB spindle was 112 and 'campi' (JIS) taper the seller was not sure about one thing. does this crankset use a symetrical or asymetrical spindle?

the drive train is the Rigina 1992 cranks, shifters and derailleurs. anyone have experience with them?


Thanks BG

OOPs almost forgot the link to VeloBase
http://velobase.com/ViewSingleComponent.aspx?ID=f2b30bb4-bd72-4f04-a5a7-9537d1335e50&Enum=115

DMF
01-15-10, 02:56 PM
I don't, but I would guess that they're intended to mount on a Campy BB (unless Ofmega made BBs).

If that's true, I don't believe Campy had an asymmetrical BB in 1992. (My 92 catalog is offline at the moment; I can post an update when it comes back.)


Pretty crank, btw.
Chombi
01-17-10, 10:42 AM
I couldn't think why an early 90's Italian square tapered crank would not have anything but an ISO taper spec to it. Hghly unlikely it's JIS.

Chombi

DMF
01-17-10, 02:06 PM
Okay, the 92 catalog lists Record, Chorus, Athena BBs, both cartridge and cup/cone - all symmetrical and all 111mm. The next earlier catalog I have is 1987.

If it used a Regina BB, then this info is useless to you ...