Bicycle Mechanics - Can anyone tell me what part I'm missing?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
NomeBiker4
02-13-10, 10:47 PM
Does anyone know which part I'm missing. I asked around and someone said that they think it's a quick release skewer. See the picture below.
http://www.flickr.com/photos/31212061@N02/4355631710/

operator
02-13-10, 10:49 PM
Does anyone know which part I'm missing. I asked around and someone said that they think it's a quick release skewer. See the picture below.
http://www.flickr.com/photos/31212061@N02/4355631710/

You are missing the standard quick release skewer for a front wheel. There are also hex key skeweres that provide the same function which are not quick release
zebede
02-14-10, 10:51 AM
http://bicycletutor.com/remove-install-wheels/

Bianchigirll
02-14-10, 11:02 AM
yes you need a skewer. similar to the silver one below. the green one requires a allenwrench to tighten and loosen and helps reduce theft. if there is a LBS (local bike shop) near you take the bike there. they will sell you what you need and show you how to use it.
JanMM
02-14-10, 12:56 PM
the green one requires a allenwrench to tighten and loosen and helps reduce theft.

...and is a little bit lighter.
davidad
02-14-10, 04:42 PM
If you bought it used you might consider doing or have an overhaul done on the hubs.