Electric Bikes - BionX Throttle Controller
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
02-14-10, 05:56 PM
I replaced my BionX controller with a BionX throttle controller. The throttle does not seem to work. However, the peddle assit does work . Are there any codes that I need to change in order to activate?
02-14-10, 07:39 PM
If the throttle stops working, push on "Mode" and "G" at the same time. This will initiate a countdown from 9 to 1; during the countdown, push the throttle on. After the countdown is over, release the throttle. The display will now show a "G" setting; push on "A" until the setting is "0" or a positive number. The throttle will now be reset. Push "Mode" to shut down and save your settings.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.