Classic and Vintage Bicycles: What's it Worth? Appraisals and Inquiries - Colnago and Peugeot Appraisals

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Colnago and Peugeot Appraisals

r.cianci
02-15-10, 01:00 AM
Hey,

I came across these 2 bikes and was wondering what their value would be.

Thank you! :)

Bianchigirll
02-15-10, 07:01 AM
Hello r.cianci welcome to the forums. there is not much information here.

since the Colnago is enslaved in a trainer I would not give more han $200 for it. is there rust on the TT or the BB shell area? what kind of brakes? the brake levers look cheap or are missing hoods. what are the derailleurs, crank and hubs?

the Peugeot maybe $75 is the frame is my size
EjustE
02-15-10, 01:54 PM
Is that damage on the TT and drive side seat stay on the Peugeot?

I see two Colnagos in these pictures: a red and part of a silver

r.cianci
02-15-10, 02:01 PM
Hey,

"Colnago International" is printed on the red Colnago on the frame leading from the BB to the rear wheel.

The tape on the Peugeot was put on to prevent the paint from rubbing by the brake lines, there is no structural damage on either of the two bikes.

Thank you for the quick replies!

What would the estimated values of these bikes be?


- Thank you
WAZZUBIKER
02-15-10, 02:08 PM
I would remove the tape on the top tube of the Peugeot. Does it say Super Competition under the tape? If so that Peugeot is worth a lot more than 75$. It looks exactly like my Super Competition. If it is there should also be a Reynolds 531 sticker on the downtube on the chromed fork.
miamijim
02-15-10, 02:22 PM
Better pictures and descriptions are needed.
EjustE
02-15-10, 02:22 PM
Those look like Stronglight 104 drillium cranks on the Peugeot. The 531 Sticker should be on the DT between the Shifters, if it is a PXN10E (but I doubt it is for a few reasons, incl. the lack of Nervex Lugs). It is worth more than $75, but to give you a valuation for both need a component list and the frame material.
EjustE
02-15-10, 02:30 PM
On second thought, the Pug looks like an '82 PBN10 with drilled Stronglight 104 cranks. 103 Carbolite frame, about 25.5 lbs.
miamijim
02-15-10, 02:31 PM
The Peugeot is either a 'Super Competition' PXN10 with a full Reynolds frame and fork or a 'Competition' PKN10 with 3 main tubes Reynolds. I think its a PKN10.

Reynolds fork decal = PXN10
NO Reynolds fork decal = PKN10
EjustE
02-15-10, 02:45 PM
The Peugeot is either a 'Super Competition' PXN10 with a full Reynolds frame and fork or a 'Competition' PKN10 with 3 main tubes Reynolds. I think its a PKN10.

Reynolds fork decal = PXN10
NO Reynolds fork decal = PKN10

Wasn't the fork on the PXN10 chromed and on the PKN10 partially chromed? Could be the picture, but this does not look chromed (and it is not partially chromed) . But it could be a replacement fork. The 81 and 82 PKN10 came with the drilled 104 cranks as well. And on the TT just ahead of the tape you can barely make out "Competition".
r.cianci
02-15-10, 03:08 PM
Hey,

Thank you for all of the great replies.

There is a reynolds logo on both sides of the fork (it is cromed - just dirty :) )

There is also a reynolds logo on the top of the downtube

The front derailleur and crank are also Peugeot.

Any estimates? I can get more information if you let me know what would be helpful.

Thank you!