BMX - stem

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : stem

tyler11
02-28-10, 03:25 PM
what upp aint bin on in a while
i decided to take my stem to machining class
what yall think
it started out as a stock subrosa stem

mykesbykes
02-28-10, 06:27 PM
interesting, need mor pics...
fuzzbox
02-28-10, 10:08 PM
cnt udrstnd wut u r syin. u shd prbly tak n eng/wrt clas 2.

tyler11
03-01-10, 04:48 PM
ok ill get some up
i want to borrow my friends s&m stem and make my own. since thier made out of the same aluminum
mykesbykes
03-02-10, 01:42 AM
I was interested in how much you cut off. I have been thinking of working on a GT mallet. Before and after weights would be useful as well.
tyler11
03-02-10, 04:38 PM
i dont know how much i cut out exzactly, all i know is i cut through the center of the front plate and made the distance from the inside edge of the holes and the outside edge the same on both sides. i would estamate the gap is about 0.450
there is one thing that aggervates me, i dont know if you can see it but i forgot to zero out the scale and its 40 thousandths to one side