Road Cycling - Xero wheels

Hey guys I'm buying a Giant OCR Elite. I've researched about every component on that bike and found it to be good stuff. There is one exeption however. I can't seem to find any info on the wheels. They are Xero XSR-2 aero wheels. The hubs are also listed as Xero XSR-2. Does anybody have any experience with these wheels/hubs? Are they decent? I'm not a weight weenie so I don't care if they are a little heavier than some other wheels I just don't want something that's not strong as I weigh about 195 lbs.

Hi I saw your posting from a couple of years ago about buying an OCR Elite with Xero XSR-2 wheels. I was thinking of buying the an OCR3 with XSR-3 wheels and I also weigh around 200 lbs. I was wondering if you bought the OCR Elite in the end and how the wheels performed and lasted with someone of our weight?
Thanks in advance

Hi I saw your posting from a couple of years ago about buying an OCR Elite with Xero XSR-2 wheels. I was thinking of buying the an OCR3 with XSR-3 wheels and I also weigh around 200 lbs. I was wondering if you bought the OCR Elite in the end and how the wheels performed and lasted with someone of our weight?
Thanks in advance

I have an OCR C3 (2005) with the XSR-3 wheels. I have had it about 1.5 years so far and the wheels have held up fine. I run around 195 as well.

-D

I bought a 2005 OCR Limited with the XSR-3 wheels. I found them flexy AND heavy. When climbing hard or cornering at speed, the brake pads would often rub. I weigh 230lbs.

I ditched mine, had a better set built, and am much happier.

I had a set on my OCR1 and they seemed decent , but they are not as good as the Mavics that I have on the OCRC1.

I have a friend with a Giant and some low-end Xeros. They are as heavy as my 32h/36h DeepVs. He hasn't had any problems with them though. He's around 165 lbs.