Singlespeed & Fixed Gear - Sell my bike? I think it's too small...

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




StOCK
04-26-10, 12:41 PM
I am 6 feet tall and ride a 55cm raleigh rush hour. I finally settled on a seat position which is comfortable for me and honestly it's pretty high. I think the bike is too small, but I don't know if it's a properly sized bike would help any. Here is a picture:

http://imgur.com/2kjz7.jpg

My seat is actually a bit higher than in this picture, maybe an inch or so. My wrists and back hurt a bit when I ride for extended periods of time. Do you think it's worth it to sell it and get a properly sized BD bike or similar? Would those be too much of a downgrade? Also, any estimates of what I could sell it for in NYC/brooklyn?


Dinosaur88
04-26-10, 01:29 PM
looks fine to me :notamused:. sounds to me like you need to strengthen your abdomen or maybe try some risers out?

Scrodzilla
04-26-10, 01:40 PM
+1

Try out some different bars and have fun experimenting.


riot2003
04-26-10, 02:05 PM
yeah, doesn't look too bad. maybe a setback seatpost? could help as well?

lz4005
04-26-10, 02:18 PM
Different bars, either risers or mustache could help. As could moving your brake levers away from the stem and towards the ends of the bullhorns. That would put your hands in a different position and increase your reach. You could also try a longer and/or higher angle stem.

The best thing to do, if you want to try to make this frame work, may be to talk to the people at your LBS about fit and how you could adjust things to work better for your body type.

carleton
04-26-10, 02:30 PM
Spend an hour with an experienced bike fitter. The money you spend there will not be much compared to the loss you will take by selling one bike to buy another.

Measure twice. Cut once.

milkcratebasket
04-26-10, 08:55 PM
Your bars don't look very comfy to me.I would recommend some road drops. I am 6'4 and ride a 58cm c-t frame. There is more seat post than the average bike on here but my bb is pretty high.

shubonker
04-26-10, 09:31 PM
Your bars don't look very comfy to me.I would recommend some road drops. I am 6'4 and ride a 58cm c-t frame. There is more seat post than the average bike on here but my bb is pretty high.

The man just started riding bikes, is experiencing wrist pains and you want him to try bars that put him into a more physically demanding position?

GO GET FITTED!!!!!

milkcratebasket
04-26-10, 09:49 PM
I don't think road drops are more physically demanding. I used to ride bullhorns and found them to be rough on my wrists. I agree he should go get fitted but I would recommend road drops as opposed to bullhorns, risers or track drops(a lot of people use these on the street for some reason). I also didn't know he just started riding bikes.

Loose Chain
04-26-10, 10:14 PM
You bought a track bike with pretty aggressive geometry, looks about right to me.

carleton
04-26-10, 10:16 PM
Hahaha!

How can you guys say what's right or not without seeing the rider?

Does this jacket fit the OP, too?

http://4.bp.blogspot.com/_JrEhxm1cn4Q/SdEtCa4TQ1I/AAAAAAAAAhU/XWtxIF_U3Pg/s400/tonic+suit+jacket+%C2%A355.jpg


Road bikes come in 2cm incriments and are then micro-adjusted by millimeters. Buying the wrong sized bike is common. Buying the wrong sized bike and not adjusting the seatpost, saddle, & stem are also common.

carleton
04-26-10, 10:24 PM
You bought a track bike with pretty aggressive geometry, looks about right to me.

The Rush Hour does not have an aggressive geometry.

Brian
04-27-10, 06:46 AM
Normally, I would ask for a photo of your girlfriend/wife/sister with the bike, but if you want internetz advice on fit, you should post a photo of yourself on the bike.

I see a full stack of headset spacers (I hope their carbon fiber) already, so it may be too small. But if you don't have the money for a proper fitting, and don't want to lose a chunk of change selling it at a loss, then there are a few guys here that offer good advice.

Loose Chain
04-27-10, 06:54 AM
The Rush Hour does not have an aggressive geometry.

Looks aggressive to me. Certainly not going to get the bars above the saddle with that job, not exactly a beach cruiser.

the_don
04-27-10, 06:57 AM
(I hope their carbon fiber)

I hope their carbon fiber is better at grammar than you!

http://images3.wikia.nocookie.net/__cb20071026221229/uncyclopedia/images/thumb/c/c8/Literecy-cat.jpg/400px-Literecy-cat.jpg

Brian
04-27-10, 07:09 AM
I hope their carbon fiber is better at grammar than you!



Yeah, I just don't know what's happening, but lately my spelling = fail.

the_don
04-27-10, 07:12 AM
i noes wot u r saying its liek taht guy hu was liek askin qweshuns an kept rmabling inkoheareant like an noone no wot he woz sayin

aMull
04-27-10, 07:40 AM
First change the bartape and bars, just hideous. I'm 6'1 and ride 58 and sometimes it feels small. So maybe you should get a 56/58. Test ride one.

the_don
04-27-10, 07:54 AM
HTFU! I think you need to flip the stem, flatten out the Horns to be parrallel to the ground and put some TT reverse pull levers on it. Ride more and get stronger. Often back pain occurs from not being stretched out enough. And your saddle to bar drop is not big at all!