Singlespeed & Fixed Gear - Campagnolo Daytona Crankset

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Campagnolo Daytona Crankset

Squirrelli
05-07-10, 07:41 PM
I saw a set of Campy Daytona crank at my LBS for 75 dollars but I could not find any information about them online...I just know they abandoned the name Daytona and changed it to Centaur.
It is square tapered, but not sure if it is JIS or ISO. Any information would be greatly appertained!

dookie
05-07-10, 08:39 PM
iso.

what else do you want to know?
Squirrelli
05-07-10, 08:41 PM
Thanks :)
There is also a set of Veloce for 5 dollars less but more scratched up, which one would be a better deal? Are their qualities pretty much the equivalent?

AEO
05-07-10, 08:57 PM
$75 for daytona cranks? do they come with chainrings and BB?
Squirrelli
05-07-10, 09:02 PM
Yuppers, 53/39 rings as well as BB.
Is it a good deal though?
AEO
05-07-10, 09:06 PM
well, if it comes with rings and BB, that sounds like a decent deal.
Squirrelli
05-07-10, 09:08 PM
Thanks AEO :)
I think I am going to get it then.
cs1
05-08-10, 02:32 AM
Daytona/Centaur and below use a 111mm symetrical BB. If you need to get different spacing Campy also made a 102mm symetrical BB for Chorus and above. They also made a 115mm asymetrical BB for the Centaur and below triples.

There aren't as many options for ISO taper BB's than JIS versions. Good luck on the project.