Mountain Biking - Question about MTB skewers?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Question about MTB skewers?

BurnNotice
06-02-10, 02:08 PM
I have the Shimano freehubs RM65's. Everywhere I look for skewers for a MTB none come in the length that I can see will fit. Seems like it takes 170mm length skewer and not a 135mm skewer.

What is up with this measurement? I measured the skewer with digital calips. And the Shimano site says it takes 170mm!

Can't seem to find a aftermarket skewer like the DT Swiss ratchet or anything else to replace the stock ones.

urbanknight
06-02-10, 02:20 PM
170mm is the length of the entire skewer. 135mm is the frame spacing the axle fits inside. Different manufacturers specify different measurements, but that should fit unless there's something wildly unusual about that hub or your frame that I don't know about.
BurnNotice
06-02-10, 02:24 PM
170mm is the length of the entire skewer. 135mm is the frame spacing the axle fits inside. Different manufacturers specify different measurements, but that should fit unless there's something wildly unusual about that hub or your frame that I don't know about.

I see! Nothing unusual. Std. 6 bolt disc brakes. Thanks!