BMX - If you Want To see An Old Bike, Here Ya Go.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-16-10, 07:13 PM
Recently restored my race bike. Got the frame in August '81. Built it up and raced it. Other than the Tuffs and being cleaned up and repainted (the original paint peeled off in chunks shortly after I got it,) and new rubber, it is exactly as I raced it until '86.
07-20-10, 10:24 AM
Sweet Ride. I would love to find an old 77 or so Webco and try to recreate my first race bike.
07-22-10, 03:20 PM
That's awesome! What does it weigh?
07-22-10, 09:06 PM
Erzulis, I am not sure. I would say about 24 lubs. The Tuffs add a little weight and my old Araya 7Xs were a bit lighter. I have always been a bigger rider and reeally liked to jump, so I used heavier, stronger stuff.
FYI, the Landing Gear is first gen, the Profile crank is second gen. Then newest parts are the Tuffs ('85,) and the grips are circa '91. Everything else is pre-'85. Oh yeah, the tires are new...
07-22-10, 11:10 PM
Just cause tuffs are heavier does not mean they are stronger. Those are plastic and if you are a bigger rider doing jumps don't be surprised if they fail on you.
07-23-10, 07:59 PM
As to the Tuff being easy to break... not so sure about that. It is actually made from Zytel Nylon, not plastic. They are actually quite, well, "Tuff." I think in some cases they might actually be stronger than a traditional spoke-type wheel. Keep in mind I am referring to the 36 hole rims of yesteryear. A pretty hard sideways landing could potentially buckle a spoked wheel, whereas a Tuff Wheel might flex, but should snap right back. They are pretty stiff.
An interesting story is in order here concerning Tuff Wheels and my racing days. Here you go:
ABA Fall Nationals, Lancaster, CA, 1982. First ever ABA jumping contest. I entered along with a bunch of other riders. I had first for a while, but was passed up by none other than the famous Jeff "Kos" Kosmala. He took first and I ended up third. Not too bad. The interesting part was Jeff's first jump. He flew of the ramp and when he landed he totally blew his back rim. It was a spoker. A kid in the crowd offered to let the Kos use his back wheel so he could finish the contest. The rim he was loaned was, you guessed it, a Tuff Wheel. There is a pretty well known photo that made some of the BMX publications of him in mid-flight with the spoked wheel in the front and the Tuff in the back. One was in the February '83 issue of BMX Action. Hopefully it will be attached below. It also appeared in the ABA monthly newspaper from the opposite side. Me and my racing buddy Rob are in the background.
07-24-10, 11:50 PM
Racing is a different story but if it was street type stuff I'd only run it in the front.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.