Bicycle Mechanics - Rebuilding LOOK pedals....new territory....

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
Thumpic
07-21-10, 09:25 PM
160845160846160847I have never tried to rebuild pedals before.....I know that one of these has lost all the bearings. Are these a fairly standard size? They don't appear to be too complicated. I tried to find a diagram for them but had no luck. Any help/suggestions are welcomed...thanks in advance!!

Thumpic
07-22-10, 05:29 AM
??
davidad
07-22-10, 04:43 PM
Those are moldy oldies. When you open them up check the axle bearing surface for pitting and the internal cups for the same. If they are badly pitted replace the pedals. The balls should be a standard size. Most are English measurements. 1/8,5/32, 3/16 etc.