Classic & Vintage - Show me some Steep Angled Dropouts
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-28-10, 11:56 AM
I'm looking for some visual help here please... I need to see what a bike with dropouts angled in excess of 38 degrees looks like as a basis for comparison.
I assume it should be pretty obvious looking if it was angled that steeply.
I'm curious because I need to pick up a set of anti-rotation washers for a shimano nexus hub and they are dropout-angle dependent.
07-28-10, 01:03 PM
My one Nexus install is on a 20° drop out so no pics but according to the Non-Turn Washer Application Chart (http://bike.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0012-downloadFile.html/05)%20Non%20Turn%20Washer%20Chart.pdf) the 7R/7L washers (black/grey) should work in both 20° and 38° dropouts.
07-28-10, 01:35 PM
Thank you! That chart is most helpful and it looks like you're totally right on that one, I'll need the black/grey 7R/L washers.
Much appreciated :D
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.