Framebuilders - Quill stem components?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I'm planning on fabricating my own stem for my next bike build, a quill stem something along the lines of the old Salsa cro-moly stems. Does anyone know where I can obtain stem-specific components such as handlebar pinch bolts, long binder bolts, stem wedges, and stem caps?
I am planning on fillet brazing straight gage cro-moly.
08-22-10, 05:05 PM
respectively, lathe, used parts, lathe and lathe. I don't know if Andy Stewart has any of his 5mm binders left, those were the only stem specific ones I know of. Otherwise, people use seat post binder bolts/and or make them on a lathe.
And in PA, you could probably get a lathe for less than it would cost to buy those parts if, say, paragon sold them.
Would another option be one of the folks selling lugged kits?
I know absolutely nothing about lathes, never used one, never set one up, never even seen one in action. My guess is that I would maim myself in any number of ways, most of them serious.
The binders (M6) can be bought at Ceeway or Nova, and the quill bolts and wedges taken from another stem. Many steel stems (Ritchey, Salsa) had those caps you could use, but yup a lathe is how you'd make one.
While on the topic. I made a 1'' quill stem using 7/8x0.058 tubing for both the quill and extension (80mm), thick enough you guys think?
08-22-10, 10:24 PM
The M6 binders are going to be really big. The 5mm binders will be much nicer You can check with Andy Steward for availability, not sure he checks here any more. Here is an email from July mentioning the availability (http://search.bikelist.org/getmsg.asp?Filename=framebuilders.11007.0237.eml)
I really don't think that .058 tubing is going to be thick enough for the quill, and I'm not sure about the extension either.
There is a video by Paternek that you can get from Smartflix. It gets into all the component sizes etc...
From what I've seen online the quill is 0.065 or 0.058 (Ritchey, Salsa, Cinelli -wall divided by 3-, etc) so hopefully I'm in the ball park. For MTB stem thicker is probably better. Unfortunately the Paterek manual didn't specify the wall.
For the extension, people use 1x0.049 or 1-1/8x0.049 I think. 7/8x0.058 is close to the former in terms of stiffness. I figured since it was a short extension, that it will see laid back bars (that are way flexy).... Hopefully it's okay.
And most stems (aluminum, steel) use a single M6 binder. With a removable face plate and multiple binders I agree it would look big.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.