Ninshadow
09-24-04, 09:40 PM
When ever I grind or stall it loosens bothe my front and rear axle nuts and I even have anti spin set up in back. My front gets really loose and the back just gets loose enough to piss me off. what sould I do?
BMX - Spining pegs
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Spining pegs
sxe fbm rider
09-24-04, 10:25 PM
If you have 3/8" get primo jewels.. if you have 1/2" get bizhouse nads.. they really work and are awesome... they will really hold tight man.
Ninshadow
09-24-04, 11:53 PM
Its funny how both of those are references to ... kahonas lol
sxe fbm rider
09-25-04, 12:33 AM
and both will stay on your bike longer than your "kahonas" will stay on you.
ezekiel
09-27-04, 12:30 AM
dont be a ***** and lock that **** down hardcorex3 ...or whatever.
sxe fbm rider
09-27-04, 12:36 PM
what??
haro_rider09
09-27-04, 05:12 PM
hes probably sayin dont b a wuss and tighten them down hard as u can
ezekiel
09-27-04, 10:48 PM
graw! put some muscle into it. this forum wont let me swear...
Ninshadow
09-27-04, 10:52 PM
Trust me I have and I am one of the strongest kids around. I am about as strong as three avarege 16 year olds. If I put anymore poop on those axle nuts they will strip
sxe fbm rider
09-28-04, 11:15 AM
did you get the jewels yet? They will work.. they are threaded sockets.. they are awesome.. look into thme im telling you.
Yoz
09-28-04, 01:25 PM
" ..put any more poop into it " Ninshadow ?,
in UK, poop = turd
lmao
in UK, poop = turd
lmao
Ninshadow
09-28-04, 09:02 PM
I will get some soon I just need to get some cash. I tightened them really hard last night and they seem to be holding. I am thinking about just getting really hard nuts. they are enexpensive compared to jewals and nads too.
Yoz
09-29-04, 01:24 PM
crikey..... nuts, jewals or nads ?
hehe
hehe
edmej123
09-29-04, 07:07 PM
ha
Ninshadow
10-01-04, 07:28 PM
I just risked striping my nuts. I tightened them and I haven't had any spining yet
JMC
10-04-04, 12:54 PM
cor, i seeing here and there out glaring geezer stares here, yoz. these people get well lairy at the sound of any provocation. jewals nads and wat not all reckon a bit rounded, yeah?
Yoz
10-04-04, 01:39 PM
oops, OK point taken, was only having a giggle, will bear in mind for future.
Ninshadow
10-06-04, 10:41 PM
Darn they started spinning agian. I need anti spinners and nuw nuts. Are titanium nuts any good or should I get special made grade 8 nuts by a fastener company. That would be cheap too.
Mr.Noobie
10-06-04, 10:43 PM
i have a question too
does standing on one peg while doing a fork glide bend the axle or make it lose at all?
does standing on one peg while doing a fork glide bend the axle or make it lose at all?
Ninshadow
10-06-04, 10:45 PM
Not if its a strong axle most 3/8 will handle being stood on and all 14mm will. It shouldn'rt loosen them if the axle nuts are tight.
Mr.Noobie
10-07-04, 11:49 PM
oh ok good