Classic & Vintage - What should I know about rod brakes?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
09-05-10, 08:37 AM
Starting my first restore of a Raleigh Tourist. Know absolutely nothing about rod brakes! Any suggestions of great websites I should visit?
09-05-10, 01:24 PM
I think sheldonbrown.com has a article buried somewhere regarding rod brakes. Also maybe Flying Pigeon LA's site too. But, frankly there isn't much to them. I actually find them easier to get tuned up than more modern brakes. Set up right they stop my bike just fine, which for some reason seems to be contrary to a lot of other people's experience/opinion.
Just make sure your wheel is sorta true, then use the screw/bolt adjuster to bring the pads in close to the wheel. Then make sure that the brake stirrup guides (I have no idea if that is actually what they're called, but I think you'll know what I mean. Those things that hold the little studs coming off the brakes) are moved to such a location that they force the brake pads to squeeze together a bit when you pull the brake lever.
This makes the pad contact the correct part of the rim, and provides the "spring" return to the idle position. Done. Good luck.
09-05-10, 09:51 PM
Are you talking about the kind that squeeze together or the kind that pulls against the inside of the rim? This old Raleigh Touriste had the second kind and I did not think they were that great. Also, you had better make sure you remove all hop from your wheels when you build them.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.