schristi69
09-07-10, 02:55 PM
Does anyone have a source for 126mm QR skewers? I prefer the sealed type like Shimanos and not the split cam type.
Bicycle Mechanics - Need 126mm Skewers
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Need 126mm Skewers
FBinNY
09-07-10, 03:12 PM
I have some Campy's, Mavics, Suntours, and inexpensive Maillards. PM me if interested an I'll quote.
canam73
09-07-10, 04:05 PM
I needed a set and bought some new 130mm ones. The nut side screwed down far enough to lock a 126mm wheel in. I just used a grinder to shorten the thread end so it wouldn't stick out.
AEO
09-07-10, 04:09 PM
use a grinder or hacksaw and just lop off 4mm off of a skewer designed for 130mm wheels.
it's actually not even necessary to cut the end off as long as the tip doesn't stick out too far.
it's actually not even necessary to cut the end off as long as the tip doesn't stick out too far.
HillRider
09-07-10, 08:18 PM
it's actually not even necessary to cut the end off as long as the tip doesn't stick out too far.
I'd cut off the excess. The rod sticking out is sharp enough to do a real job on your leg if you brush against it. It's easy to cut off and file the rod smooth so it is flush or slightly inside the nut.
I'd cut off the excess. The rod sticking out is sharp enough to do a real job on your leg if you brush against it. It's easy to cut off and file the rod smooth so it is flush or slightly inside the nut.
schristi69
09-10-10, 02:31 PM
I thought about doing that, just was not sure if there was enough thread. I will give it a shot. Thanks