Bicycle Mechanics - So the SKS Chainboard is a failure...
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
It rubbed too much on the guiding pin and other things. I ended up pretty much demolishing it in a bid to get it to fit.
But I still ahve the metal attachment on the bottom bracket. This makes me think: I could pretty easily I think just get a straight piece of metal or plastic and just screw in the sucker, protecting most of my pant leg from the chain.
How to best do this?
I am inclined to go down the same route. At the moment it is though the issue of prioritizing projects - my chain protection works, so the project is down in priority. In any case, my plan is to use an alu L-angle extending from the seat stay towards the seat tube. By the seat tube, I plan to add an alu sheet running down from the L-angle. I might split the sheet into two pieces, secured together with maybe with one rivet and one bolt, to allow for adjustments. My chainring is covered with a Chain Disk.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.