Bicycle Mechanics - Tyre pressure

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Hi
I know this has been asked before BUT... what is the correct tyre pressure for a road bike. I'm not referring to tubeless.
I bough myself a foot pump with a fancy gauge, manometer or whatever you like to call same.
regards
r
MichaelW
03-26-02, 10:50 AM
The max pressure is usually on the tyre sidewall.
velocipedio
03-26-02, 10:56 AM
Like Michael said...
Most good quality 23c road tires these days have a max pressure of 120 psi. I prefer to go to the max most of the time.
Originally posted by MichaelW
The max pressure is usually on the tyre sidewall.
So I went and looked at the tyrewall...
Michelin suggests between 85 and 110psi or 5.8 to 7.5 bar!
what is the correct tyre pressure for a road bike. I'm not referring to tubeless.
FWIW, I have never heard of tubeless tyres for a road bike.
Originally posted by Harry
So I went and looked at the tyrewall...
Michelin suggests between 85 and 110psi or 5.8 to 7.5 bar!
It's a composite type (there's no tube) which you stick to a special rim.
A few months ago, someone posted that Lance Armstrong runs higher pressure in the rear tyre than in the front, because of the load difference. I maintain about a 5-10 PSI differential, keeping both above the minimum and below the maximum listed on the sidewall. That said, note that the rim, rather than the tyre, can be the limiting factor for maximum inflation pressure.
Originally posted by John E
A few months ago, someone posted that Lance Armstrong runs higher pressure in the rear tyre than in the front, because of the load difference. I maintain about a 5-10 PSI differential, keeping both above the minimum and below the maximum listed on the sidewall. That said, note that the rim, rather than the tyre, can be the limiting factor for maximum inflation pressure.
Thanks John
This is the sort of answer I was looking for!
The RTFM sort of reply does my head in. You just want a quick answer, rather than trawelling through pages of manuals or scraping sh*t from tyres and the like.
Happy Easter
It's a composite type (there's no tube) which you stick to a special rim.
I'm sorry, Harry, you lost me on that one. Are you, perhaps, talking about a tubular (boyaux) tyre? If so, they do have tubes. I know, I use tubulars.
roadbuzz
03-29-02, 08:27 PM
Originally posted by Harry
Michelin suggests between 85 and 110psi or 5.8 to 7.5 bar!
I would always put at least 100 psi (6.9 bar). Any less and you run a high risk of pinch flats.
Originally posted by D*Alex
I'm sorry, Harry, you lost me on that one. Are you, perhaps, talking about a tubular (boyaux) tyre? If so, they do have tubes. I know, I use tubulars.
Tout à fait!
They seem to have gone out with the injuns here in Switzerland.
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.