trek330
10-15-10, 11:56 AM
Would a Dura Ace 7700 headset be replaceable with a Dura Ace HP 7410 series?They both are 1 inch and the 7410 is 24TPI(whatever that means)Thanks!I need a new headset!
Bicycle Mechanics - dura ace headset
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : dura ace headset
bikeman715
10-15-10, 12:31 PM
yes you can change one for the other . TPI means thread per inch. the 1 inch mean the size of the steering tube on the fork.
TimeTravel_0
10-15-10, 12:36 PM
stack height compatible?
trek330
10-15-10, 02:06 PM
How do I determine stack height?
bikeman715
10-15-10, 02:43 PM
take the headset off the bike , stack the parts on a table in the same order, use capliers or a ruler and measure. if the new one is the same or smaller (shorter) then all is good. if not you need a longer steeing tube on the fork . or new fork.
desertdork
10-15-10, 04:26 PM
take the headset off the bike , stack the parts on a table in the same order, use capliers or a ruler and measure. if the new one is the same or smaller (shorter) then all is good. if not you need a longer steeing tube on the fork . or new fork.
This assumes the portion of each cup that is pressed into the headtube is the same height, right? I would have expected some variance between different headset models.
This assumes the portion of each cup that is pressed into the headtube is the same height, right? I would have expected some variance between different headset models.
HillRider
10-15-10, 05:46 PM
The HP-7410 is a 1" threaded headset with cartridge bearings and has a stack height of 37.6 mm.
I can't find any reference in Shimano's tech documents to an HP-7700 headset but they do show the 7410. Also, I don't recall Shimano making anything newer than the 7410 version and by the time the 7700-series (9-speed Dura Ace) came out, Shimano was pretty much out of the headset business.
I can't find any reference in Shimano's tech documents to an HP-7700 headset but they do show the 7410. Also, I don't recall Shimano making anything newer than the 7410 version and by the time the 7700-series (9-speed Dura Ace) came out, Shimano was pretty much out of the headset business.
trek330
10-15-10, 08:19 PM
The HP-7410 is a 1" threaded headset with cartridge bearings and has a stack height of 37.6 mm.
I can't find any reference in Shimano's tech documents to an HP-7700 headset but they do show the 7410. Also, I don't recall Shimano making anything newer than the 7410 version and by the time the 7700-series (9-speed Dura Ace) came out, Shimano was pretty much out of the headset business.
Maybe that's why I don't find a 7700 headset on e-bay!!
I can't find any reference in Shimano's tech documents to an HP-7700 headset but they do show the 7410. Also, I don't recall Shimano making anything newer than the 7410 version and by the time the 7700-series (9-speed Dura Ace) came out, Shimano was pretty much out of the headset business.
Maybe that's why I don't find a 7700 headset on e-bay!!