Bicycle Mechanics - mongoose cambridge bike/sram fron twist shifter.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-25-10, 11:57 AM
I converted the shifter to a sram dual twist shifter system. However the left shifter
does not fully go to the highest speed (twisting back to me), but will put the chain
on the large ring after going to middle ring. It is an index type. So what can I do about it?
10-25-10, 04:58 PM
I'm not quite sure what the issue is. Could you explain in more detail? Do you mean the left shifter indicator marker does not go all the way to "3", but the chain is still moved onto the largest ring? If that's the case, I wouldn't worry about it too much. You may need to re-adjust the front derailleur (the SRAM shifter manual should show how to do this properly).
10-27-10, 01:57 PM
I went back and looked at the cable path. Lo I had routed the cable around the anchor nut wrong....inside instead of outside /0....0/. It is working well now.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.