Bicycle Mechanics - Rohloff cross 2 build
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I just installed the spokes on my first cross 2/Rohloff. The spokes seem to take the best line when they cross under/inside the outer spokes. So on a cross 3 they go under 2, and over 1. But in this case they go under two and then attach to the nipple . Is this correct. Or is there some advantage to a different routing like under one, over one?
Spokes should touch at the outer cross. Having them touch at the inner cross will put a nasty bend in them. Not having them touch at all leaves them more prone to going slack IME. Might not be much of an issue on a hub with equal dish.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.