Bicycle Mechanics - Band-aid repair to brakes opens scab

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
juliansparrow
11-08-10, 08:55 PM
I recently obtained a 1989 Cannondale SR2000 when my 1974 Motobecane Grand Jubile died and had to scavenge a few key pieces to make it perfect for me. However, the Shimano BR-A550 Super SLR front brake was far too short to be properly mounted on the front fork.... so I forced it on knowing I'd purchase new brakes soon. I had to find a longer recessed mounting bolt to do it but sure enough it was fine.

Then, a month ago I purchased the "Sheldon Fender Nut" set to mount on some fenders for the upcoming rainy season. I had completely forgotten about the tiny nub of a front pivot bolt and striped two mounting bolts.

So, my question is, where can I find a brake set with a recess mounted pivot bolt which is longer then the one I have now? Are there specific brands or specific product lines to look for?

reptilezs
11-09-10, 04:15 AM
current length of your front brake stud? they are all pretty similar so i doubt you will find something significantly longer. you can also look at a different fender set. the crud road racer works on many road bikes and you don't need the sheldon nut
juliansparrow
11-09-10, 06:26 PM
The male end measures 1.5cm (15mm) but only .5cm (5mm) is available to connect with the mounting bolt. The longer mounting bolt which was stripped measures 3cm (30mm). The front Sheldon Fender Nut will only allow for a little less than 1.5cm (15mm). So, I suppose I'm looking for a male end that measures approximately 3cm (30mm). Does that help you think of anything?