Bicycle Mechanics - Cheap falcon shifters good for a college campus bike fleet?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
11-09-10, 09:03 AM
First post in this forum I hope to get some good feedback.
I have been repairing used bikes and putting them up for sale or even giving some away for over 3 years now. I don't need to make the extra money as much anymore and I work on a small private college campus so I figured a great thing to do would be to offer a fleet of bikes for students to use. I have 10+ bike frames in my garage That I could turn into very solid campus bikes. The biggest problem is I need shifters because most of them are none-working for various reasons including destruction. I am seriously considering buying a bunch of these Falcon friction thumbshifters. It seems cost effective and yet they should work well.
Any thoughts? I have done some research on campus bike programs of various places and kinds, but any feedback would probably be helpful. At this point all the funding I have is my own although I am probably going to see if a couple campus departments have some extra cash to help me with the project.
I used this shifter on a 1x9 cross/commuter and it served me well. They are cheap, and for borrowers, who tend to wear stuff a little harder, you may need to replace if they malfunction from general use. I'd give them a shot for the use are intending.
11-09-10, 10:22 AM
They look fine to me, although I've never used them. Friction is the way to go for campus loaner bikes. Indexing will just be a pain and stuff will get broken quicker. Plus you can put these shifters on your bikes across the board without compatibility issues.
11-09-10, 11:09 AM
Just that shifting is less fussy when the space between cogs is wider , 5 and 6 speed, with friction shifting.
start adding 7 and 8. then compacting the stack further to go to 11 makes the window of being in the gear , narrower.
11-09-10, 11:10 AM
Functional friction shifters. Might wanna install barends if you have access to a buncha free ones. They'll help longevity by preventing bashing in bike racks and should any bikes windup upside down in crashes or from a student flipping one over to change a tube or whatnot.
11-09-10, 11:13 AM
They work fine, I have a set of the exact same model. I've since swapped for index downtube shifters, but I used them for months of daily use commuting last year and there's nothing wrong with them -- they shift across the cassette just like anything else.
I'd dig them back out if I had a bike I was needing to use them on....
I find friction shifting to be easy to use from 5-8 speeds. 9 and above I find more sketchy, but some people use 9 speed friction I've read. 10 seems a bit tough for most folks.
11-09-10, 11:33 AM
falcon or sunrace thumb shifters are respectable and dependable. I recommend them.
11-09-10, 11:47 AM
Thanks for the thoughts on these shifters. I doubt I will be running anything more than a 7 speed freewheel or cassette so I think these are just what I need.
I like the idea of the bar ends. I know I have a few extra and I am pretty sure I have some x-mart bikes that have them I could steal from. The other good thing would it would give some people another hand position since its not like these bikes are going to fit everyone that well. For the tall people I plan to put some straightbars on a couple big Schwinn Varsity bikes and just roll with the stem shifters. Its tough to improve on those for this purpose.
Anymore thoughts would be great.
11-09-10, 07:27 PM
Sounds like a cool project. I work at a college too and would love to see what you come up with and how things work out. I want to see pictures of your fleet when you are done.
11-10-10, 09:34 PM
Thanks its going to take alot of time, but I'll keep you posted. One of these days maybe I will pull out all the bikes and take a pic of the fleet in its current "before" state. "After" will probably be a few months from now.
11-10-10, 10:07 PM
I use them. I like them, a nice basic friction thumbie.
03-31-11, 11:07 PM
Here is an update on my project. I cleared out a bunch of frames and bikes and so now I am looking for a couple cheap bikes that don't need too much work to supplement what I already have. This is the first one to join my college fleet. Its a 1992 Schwinn Hurricane. Its even the college colors. The trigger shifters are sticky and gummed up so I'll try and get them working again (suggestions on how to do this would be helpful), but if not I have a bunch of thumbshifters I have salvaged from other bikes to put on this one and whatever else I end up buying. My goal is to put together 4 solid mountain bikes for less than $100 total out of my pocket and I am 1/4 of my way there. I'll probably fix up more than 4 bikes as time goes on, but I need to get started somewhere.
03-31-11, 11:17 PM
Looks like a cool project so far. Post more pictures when you get the chance!
The trigger shifters are sticky and gummed up so I'll try and get them working again (suggestions on how to do this would be helpful)
Try flushing with WD40. The grease in there can harden over time. Or if you don't use them you could always send them to me :innocent: I think those shifters with both buttons on the bottom are cool, despite their failure in the market. The left side is friction too, yes?
Friction has the advantage that a bike with a bent derailleur hanger can be very useable.
One cheep solution for the shifters might be to remove them and use the bike as a SS with the limit screws controlling the gear. It would then be a simple task to change a gear with a screwdriver if needed, for an example when a cog is worn out.
04-01-11, 04:52 PM
I assume that both shifters are indexed, but Seriously they don't shift enough to know either way. If you like those I might end up sending you a whole box of them if they don't get working. =) I remember the first indexed bike I ever rode was a Trek Mountain bike that a friend had when I was in high school and it had shifters like these. I couldn't believe how well they worked. I really like trigger and this push button type shifter alot and I pretty much hate grip shifters with a couple of exceptions.
04-01-11, 05:25 PM
If it's a little sticky, WD40. If it's frozen, PB Blaster.
04-01-11, 05:47 PM
I've used them. I think they are adequate for your intended purpose. They are very simple, cheap and pretty tough. I'd stick to 6-8sp drivetrains, probably shooting for 7sp to keep costs down and still provide decent range. Alternatively, you can also get new Shimano index thumb shifters in 5, 6 and 7sp if you'd like.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.